| 61. Furuno NX300D : Does this unit have an SO239 antenna socket? |
| The unit has a TNC socket and the supplied dual frequency H field antenna comes with cable and plug |
| Date created: 2008-06-03 10:52:54 |
|
 |
| 62. Does the GP1051 Navpod for the Raymarine C80/E80 fit an existing 9in guardrail? |
| No, but there is an alternative Navpod available which will fit - call us for details |
| Date created: 2008-05-28 19:42:38 |
|
|
| 63. Which connector do I use to interface the DigitalYacht AIT250 AIS Module with a Raymarine C or E series? |
| The AIT250 has a NMEA output (a simple two wire connection) which will connect to the NMEA input on a Raymarine C/E series. You need to make sure you have the latest software installed on your C/E series and this is available as a download from Raymarine. You download onto a blank compact flash card and plug into the C/E series slot. The only issue is if the NMEA input is being used for another product - eg a fast heading sensor etc, in which case you will need a multiplexer to mix the two strings of data together. Eissing and Actisense offer appropriate units. |
| Date created: 2008-05-28 03:08:08 |
|
|
| 64. How do you interface the EasyAIS with a Garmin 292 chartplotter? |
| The NMEA out from the AIS (white wire) goes to the NMEA in on the plotter (brown wire). The NMEA out (-ve) from the AIS also needs to be connected to NMEA ground (black - also power -ve) on the plotter. |
| Date created: 2008-05-28 02:55:37 |
|
|
| 65. If I connect GPS to the EasyAIS will it relay both position data and AIS data to my laptop via the single serial/USB connection or do I need to use a separate GPS port? |
| The system will relay GPS data through the single serial output. You will need a 3rd party USB-serial adaptor to connect to a laptop. However, your laptop and software will receive all data at the higher AIS speed not the normal 4800 NMEA baud rate. Your software may not then recognise the data. |
| Date created: 2008-05-28 02:37:27 |
|
|
| 66. What is difference between Easy AIS and AIS 2? |
| The AIS 2 is a Dual Channel unit. |
| Date created: 2008-05-28 02:35:05 |
|
|
| 67. Is the Nasa Masthead Unit and Cable compatible with the Target and Clipper series instruments? |
| Yes, it is compatible with the Target I and II as well as the Clipper series. |
| Date created: 2008-05-28 01:41:31 |
|
|
| 68. What thread does the Glomex V9174 antenna deck mount have? |
| The Glomex deck mount has a 1in x 11 BSP thread |
| Date created: 2008-05-28 01:27:53 |
|
|
| 69. What are the dimensions of the Standard Horizon GX1500E? |
| The dimensions are: 3.1in H x 7.0in W x 5.9in D
Flush-Mount Dimensions: 2.5in H x 6.3in W x 5.1in D |
| Date created: 2008-05-28 01:16:23 |
|
|
| 70. What accessories do you get with the Furuno 1623 radar? |
| The system includes the radome and 15m scanner cable. Mast mounts / antenna brackets are sold as separate accessories |
| Date created: 2008-05-28 00:23:00 |
|
|
| 71. How good is Mediterranean coverage for the Nasa Weatherman? |
| Coverage and reception is good throughout the Mediterranean. |
| Date created: 2008-05-27 16:44:56 |
|
|
| 72. What does "factory refurbished" mean and what is the warranty? |
These products are generally items that have been returned to the manufacturer because of commercial over stock reasons or items that have been sent out as advance warranty replacements and no fault has been found. They are then reworked as "new" by the manufacturer. The only issue may be brown box packaging etc. They are 100% new, fully tested and represent remarkable good value.
The warranty period is 12 months. |
| Date created: 2008-05-27 14:40:29 |
|
|
| 73. What's the difference between the Raymarine A65 and the A60? |
| The A60 has a 5.7in display, the A65 has a 6.5in display. Functionally, they are identical |
| Date created: 2008-05-23 15:11:41 |
|
|
| 74. Is the Standard Horizon HX500 radio water resistant? |
| The HX500 is waterproof to IPX7.
An IPX7 designation means the item can withstand accidental immersion in one meter of water for up to 30 minutes. |
| Date created: 2008-04-28 15:21:15 |
|
|
