: Alfatronix Pt40 Powertector Solid State Battery Guard

Alfatronix PT40 PowerTector Solid State Battery Guard - 9-32VDC / 40ASolid State Battery GuardThe PowerTector Battery Guard is a solid state device that will monitor the source voltage and disconnect the battery if the voltage falls below a pre-determined level. This will ensure there is always sufficient voltage remaining in the battery to start a vehicle engine or ensure power is available for other critical applications. The total discharge of a lead acid battery can also cause damage to its cells significantly shortening the life of the battery. The PowerTector unit can be set to disconnect equipment at a lower voltage that will still protect the battery from total discharge, while allowing for maximum battery usage.Features:Enable terminal allows the unit to be operated via the ignition or a manual switchAudible alarm and/or Visual indicator can be installed in the dashboard or cockpit to alert operator of a potential problemUsing the simple programming terminal, select the pre-set disconnect voltage according to your requirements.LED indicates operational status.All PowerTectors from 40A upwards are mounted in a rugged die cast aluminium casing with glass filled polycarbonate cover providing terminal protection and insulation.All units are protected to IP65 therefore fully waterproofSuitable for both 12VDC and 24VDC electrical systems9-32VDC Input / Output VoltageOutput Current Continuous : 40A

Alfatronix Pt40 Powertector Solid State Battery Guard - 9-32vdc / 40a