Procom 5.17 m Wide-Band Transmitting Whip Antenna for LF,MF and HF Bands SSB This antenna is intended for transmitting and receiving in the MF-HF range. It is designed for mast mounting with an open feeder installation. The antenna has very low base capacitance for best efficiency. The power rating of the antenna depends on frequency, but it can very safely be used with 400 W transmitters over the whole MF-HF band. Installation is easily carried out by means of the two hot galvanized mast clamps. The antenna has very small weight and minimum wind surface, thereby requiring only a minimum of mast strength. The glass fibre construction gives a stiff and self-supporting structure with extremely good resistance against the corrosive marine environment with UV-radiation, salt, exhaust gases and ice formation as the primary factors. HF 5000 is a maintenance-free and very reliable construction. SPECIFICATIONS ELECTRICAL -MODEL HF 5000 -ANTENNA TYPE Self-supporting antenna element -FREQUENCY 1.4 – 30 MHz -STATIC CAPACITY Approx. 60 pF -INSULAT. RESISTANCE Approx. 10 8 Ω -MECHANICAL LENGTH 5 m -EFF. ELECTR. LENGTH 4.40 m MECHANICAL -TEMP. RANGE -30° C → +70° C -CONNECTOR Open feeder. See drawing -WIND SURFACE 0.082 m² -WIND LOAD 106 N @ 150 km/h -MAX. WIND SPEED 200 km/h -COLOUR Marine white MATERIALS -Shroud : Glass fibre -Metal parts: Stainless steel and chromed brass TOTAL HEIGHT Approx. 5.17 m DIA. IN TOP END 5 mm DIA. IN BOTTOM END 20 mm WEIGHT 2.7 kg, clamps inclusive MOUNTING On 35 – 65 mm dia. mast tube | 
